Advisory: This site contains documentation for the v1.12 release candidate version of Docker Engine. For the Docker Engine v1.11 docs, see Docker for Mac and Docker for Windows are currently in Beta.

AppArmor security profiles for Docker

AppArmor (Application Armor) is a Linux security module that protects an operating system and its applications from security threats. To use it, a system administrator associates an AppArmor security profile with each program. Docker expects to find an AppArmor policy loaded and enforced.

Docker automatically loads container profiles. The Docker binary installs a docker-default profile in the /etc/apparmor.d/docker file. This profile is used on containers, not on the Docker Daemon.

A profile for the Docker Engine daemon exists but it is not currently installed with the deb packages. If you are interested in the source for the daemon profile, it is located in contrib/apparmor in the Docker Engine source repository.

Understand the policies

The docker-default profile is the default for running containers. It is moderately protective while providing wide application compatibility. The profile is the following:

#include <tunables/global>

profile docker-default flags=(attach_disconnected,mediate_deleted) {

  #include <abstractions/base>


  deny @{PROC}/{*,**^[0-9*],sys/kernel/shm*} wkx,
  deny @{PROC}/sysrq-trigger rwklx,
  deny @{PROC}/mem rwklx,
  deny @{PROC}/kmem rwklx,
  deny @{PROC}/kcore rwklx,

  deny mount,

  deny /sys/[^f]*/** wklx,
  deny /sys/f[^s]*/** wklx,
  deny /sys/fs/[^c]*/** wklx,
  deny /sys/fs/c[^g]*/** wklx,
  deny /sys/fs/cg[^r]*/** wklx,
  deny /sys/firmware/efi/efivars/** rwklx,
  deny /sys/kernel/security/** rwklx,

When you run a container, it uses the docker-default policy unless you override it with the security-opt option. For example, the following explicitly specifies the default policy:

$ docker run --rm -it --security-opt apparmor=docker-default hello-world

Load and unload profiles

To load a new profile into AppArmor for use with containers:

$ apparmor_parser -r -W /path/to/your_profile

Then, run the custom profile with --security-opt like so:

$ docker run --rm -it --security-opt apparmor=your_profile hello-world

To unload a profile from AppArmor:

# stop apparmor
$ /etc/init.d/apparmor stop
# unload the profile
$ apparmor_parser -R /path/to/profile
# start apparmor
$ /etc/init.d/apparmor start

Resources for writing profiles

The syntax for file globbing in AppArmor is a bit different than some other globbing implementations. It is highly suggested you take a look at some of the below resources with regard to AppArmor profile syntax.

Nginx example profile

In this example, you create a custom AppArmor profile for Nginx. Below is the custom profile.

#include <tunables/global>

profile docker-nginx flags=(attach_disconnected,mediate_deleted) {
  #include <abstractions/base>

  network inet tcp,
  network inet udp,
  network inet icmp,

  deny network raw,

  deny network packet,


  deny /bin/** wl,
  deny /boot/** wl,
  deny /dev/** wl,
  deny /etc/** wl,
  deny /home/** wl,
  deny /lib/** wl,
  deny /lib64/** wl,
  deny /media/** wl,
  deny /mnt/** wl,
  deny /opt/** wl,
  deny /proc/** wl,
  deny /root/** wl,
  deny /sbin/** wl,
  deny /srv/** wl,
  deny /tmp/** wl,
  deny /sys/** wl,
  deny /usr/** wl,

  audit /** w,

  /var/run/ w,

  /usr/sbin/nginx ix,

  deny /bin/dash mrwklx,
  deny /bin/sh mrwklx,
  deny /usr/bin/top mrwklx,

  capability chown,
  capability dac_override,
  capability setuid,
  capability setgid,
  capability net_bind_service,

  deny @{PROC}/{*,**^[0-9*],sys/kernel/shm*} wkx,
  deny @{PROC}/sysrq-trigger rwklx,
  deny @{PROC}/mem rwklx,
  deny @{PROC}/kmem rwklx,
  deny @{PROC}/kcore rwklx,
  deny mount,
  deny /sys/[^f]*/** wklx,
  deny /sys/f[^s]*/** wklx,
  deny /sys/fs/[^c]*/** wklx,
  deny /sys/fs/c[^g]*/** wklx,
  deny /sys/fs/cg[^r]*/** wklx,
  deny /sys/firmware/efi/efivars/** rwklx,
  deny /sys/kernel/security/** rwklx,
  1. Save the custom profile to disk in the /etc/apparmor.d/containers/docker-nginx file.

    The file path in this example is not a requirement. In production, you could use another.

  2. Load the profile.

    $ sudo apparmor_parser -r -W /etc/apparmor.d/containers/docker-nginx
  3. Run a container with the profile.

    To run nginx in detached mode:

    $ docker run --security-opt "apparmor=docker-nginx" \
        -p 80:80 -d --name apparmor-nginx nginx
  4. Exec into the running container

    $ docker exec -it apparmor-nginx bash
  5. Try some operations to test the profile.

    root@6da5a2a930b9:~# ping
    ping: Lacking privilege for raw socket.
    root@6da5a2a930b9:/# top
    bash: /usr/bin/top: Permission denied
    root@6da5a2a930b9:~# touch ~/thing
    touch: cannot touch 'thing': Permission denied
    root@6da5a2a930b9:/# sh
    bash: /bin/sh: Permission denied
    root@6da5a2a930b9:/# dash
    bash: /bin/dash: Permission denied

Congrats! You just deployed a container secured with a custom apparmor profile!

Debug AppArmor

You can use dmesg to debug problems and aa-status check the loaded profiles.

Use dmesg

Here are some helpful tips for debugging any problems you might be facing with regard to AppArmor.

AppArmor sends quite verbose messaging to dmesg. Usually an AppArmor line looks like the following:

[ 5442.864673] audit: type=1400 audit(1453830992.845:37): apparmor="ALLOWED" operation="open" profile="/usr/bin/docker" name="/home/jessie/docker/man/man1/docker-attach.1" pid=10923 comm="docker" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0

In the above example, you can see profile=/usr/bin/docker. This means the user has the docker-engine (Docker Engine Daemon) profile loaded.

Note: On version of Ubuntu > 14.04 this is all fine and well, but Trusty users might run into some issues when trying to docker exec.

Look at another log line:

[ 3256.689120] type=1400 audit(1405454041.341:73): apparmor="DENIED" operation="ptrace" profile="docker-default" pid=17651 comm="docker" requested_mask="receive" denied_mask="receive"

This time the profile is docker-default, which is run on containers by default unless in privileged mode. This line shows that apparmor has denied ptrace in the container. This is exactly as expected.

Use aa-status

If you need to check which profiles are loaded, you can use aa-status. The output looks like:

$ sudo aa-status
apparmor module is loaded.
14 profiles are loaded.
1 profiles are in enforce mode.
13 profiles are in complain mode.
38 processes have profiles defined.
37 processes are in enforce mode.
   docker-default (6044)
   docker-default (31899)
1 processes are in complain mode.
   /usr/bin/docker (29756)
0 processes are unconfined but have a profile defined.

The above output shows that the docker-default profile running on various container PIDs is in enforce mode. This means AppArmor is actively blocking and auditing in dmesg anything outside the bounds of the docker-default profile.

The output above also shows the /usr/bin/docker (Docker Engine daemon) profile is running in complain mode. This means AppArmor only logs to dmesg activity outside the bounds of the profile. (Except in the case of Ubuntu Trusty, where some interesting behaviors are enforced.)

Contribute Docker’s AppArmor code

Advanced users and package managers can find a profile for /usr/bin/docker (Docker Engine Daemon) underneath contrib/apparmor in the Docker Engine source repository.

The docker-default profile for containers lives in profiles/apparmor.