Advisory: This site contains documentation for the v1.12 release candidate version of Docker Engine. For the Docker Engine v1.11 docs, see https://docs.docker.com/v1.11/. Docker for Mac and Docker for Windows are currently in Beta.
OverlayFS is a modern union filesystem that is similar to AUFS. In comparison to AUFS, OverlayFS:
As a result, OverlayFS is rapidly gaining popularity in the Docker community and is seen by many as a natural successor to AUFS. As promising as OverlayFS is, it is still relatively young. Therefore caution should be taken before using it in production Docker environments.
overlay storage driver leverages several OverlayFS features to build
and manage the on-disk structures of images and containers.
Since version 1.12, Docker also provides
overlay2 storage driver which is much
more efficient than
overlay in terms of inode utilization. The
driver is only compatible with Linux kernel 4.0 and later.
For comparison between
overlay2, please also refer to Select a
Note: Since it was merged into the mainline kernel, the OverlayFS kernel module was renamed from “overlayfs” to “overlay”. As a result you may see the two terms used interchangeably in some documentation. However, this document uses “OverlayFS” to refer to the overall filesystem, and
overlay2to refer to Docker’s storage-drivers.
OverlayFS takes two directories on a single Linux host, layers one on top of the other, and provides a single unified view. These directories are often referred to as layers and the technology used to layer them is known as a union mount. The OverlayFS terminology is “lowerdir” for the bottom layer and “upperdir” for the top layer. The unified view is exposed through its own directory called “merged”.
The diagram below shows how a Docker image and a Docker container are layered. The image layer is the “lowerdir” and the container layer is the “upperdir”. The unified view is exposed through a directory called “merged” which is effectively the containers mount point. The diagram shows how Docker constructs map to OverlayFS constructs.
Notice how the image layer and container layer can contain the same files. When this happens, the files in the container layer (“upperdir”) are dominant and obscure the existence of the same files in the image layer (“lowerdir”). The container mount (“merged”) presents the unified view.
overlay driver only works with two layers. This means that multi-layered
images cannot be implemented as multiple OverlayFS layers. Instead, each image
layer is implemented as its own directory under
links are then used as a space-efficient way to reference data shared with lower
layers. As of Docker 1.10, image layer IDs no longer correspond to directory
To create a container, the
overlay driver combines the directory representing
the image’s top layer plus a new directory for the container. The image’s top
layer is the “lowerdir” in the overlay and read-only. The new directory for the
container is the “upperdir” and is writable.
docker pull command shows a Docker host with downloading a
Docker image comprising five layers.
$ sudo docker pull ubuntu Using default tag: latest latest: Pulling from library/ubuntu 5ba4f30e5bea: Pull complete 9d7d19c9dc56: Pull complete ac6ad7efd0f9: Pull complete e7491a747824: Pull complete a3ed95caeb02: Pull complete Digest: sha256:46fb5d001b88ad904c5c732b086b596b92cfb4a4840a3abd0e35dbb6870585e4 Status: Downloaded newer image for ubuntu:latest
Each image layer has its own directory under
is where the contents of each image layer are stored.
The output of the command below shows the five directories that store the
contents of each image layer just pulled. However, as can be seen, the image
layer IDs do not match the directory names in
is normal behavior in Docker 1.10 and later.
$ ls -l /var/lib/docker/overlay/ total 20 drwx------ 3 root root 4096 Jun 20 16:11 38f3ed2eac129654acef11c32670b534670c3a06e483fce313d72e3e0a15baa8 drwx------ 3 root root 4096 Jun 20 16:11 55f1e14c361b90570df46371b20ce6d480c434981cbda5fd68c6ff61aa0a5358 drwx------ 3 root root 4096 Jun 20 16:11 824c8a961a4f5e8fe4f4243dab57c5be798e7fd195f6d88ab06aea92ba931654 drwx------ 3 root root 4096 Jun 20 16:11 ad0fe55125ebf599da124da175174a4b8c1878afe6907bf7c78570341f308461 drwx------ 3 root root 4096 Jun 20 16:11 edab9b5e5bf73f2997524eebeac1de4cf9c8b904fa8ad3ec43b3504196aa3801
The image layer directories contain the files unique to that layer as well as hard links to the data that is shared with lower layers. This allows for efficient use of disk space.
$ ls -i /var/lib/docker/overlay/38f3ed2eac129654acef11c32670b534670c3a06e483fce313d72e3e0a15baa8/root/bin/ls 19793696 /var/lib/docker/overlay/38f3ed2eac129654acef11c32670b534670c3a06e483fce313d72e3e0a15baa8/root/bin/ls $ ls -i /var/lib/docker/overlay/55f1e14c361b90570df46371b20ce6d480c434981cbda5fd68c6ff61aa0a5358/root/bin/ls 19793696 /var/lib/docker/overlay/55f1e14c361b90570df46371b20ce6d480c434981cbda5fd68c6ff61aa0a5358/root/bin/ls
Containers also exist on-disk in the Docker host’s filesystem under
/var/lib/docker/overlay/. If you inspect the directory relating to a running
container using the
ls -l command, you find the following file and
$ ls -l /var/lib/docker/overlay/<directory-of-running-container> total 16 -rw-r--r-- 1 root root 64 Jun 20 16:39 lower-id drwxr-xr-x 1 root root 4096 Jun 20 16:39 merged drwxr-xr-x 4 root root 4096 Jun 20 16:39 upper drwx------ 3 root root 4096 Jun 20 16:39 work
These four filesystem objects are all artifacts of OverlayFS. The “lower-id” file contains the ID of the top layer of the image the container is based on. This is used by OverlayFS as the “lowerdir”.
$ cat /var/lib/docker/overlay/ec444863a55a9f1ca2df72223d459c5d940a721b2288ff86a3f27be28b53be6c/lower-id 55f1e14c361b90570df46371b20ce6d480c434981cbda5fd68c6ff61aa0a5358
The “upper” directory is the containers read-write layer. Any changes made to the container are written to this directory.
The “merged” directory is effectively the containers mount point. This is where the unified view of the image (“lowerdir”) and container (“upperdir”) is exposed. Any changes written to the container are immediately reflected in this directory.
The “work” directory is required for OverlayFS to function. It is used for things such as copy_up operations.
You can verify all of these constructs from the output of the
(Ellipses and line breaks are used in the output below to enhance readability.)
$ mount | grep overlay overlay on /var/lib/docker/overlay/ec444863a55a.../merged type overlay (rw,relatime,lowerdir=/var/lib/docker/overlay/55f1e14c361b.../root, upperdir=/var/lib/docker/overlay/ec444863a55a.../upper, workdir=/var/lib/docker/overlay/ec444863a55a.../work)
The output reflects that the overlay is mounted as read-write (“rw”).
overlay driver only works with a single lower OverlayFS layer and
hence requires hard links for implementation of multi-layered images, the
overlay2 driver natively supports multiple lower OverlayFS layers (up to 128).
overlay2 driver offers better performance for layer-related docker commands (e.g.
docker build and
docker commit), and consumes fewer inodes than the
After downloading a five-layer image using
docker pull ubuntu, you can see
six directories under
$ ls -l /var/lib/docker/overlay2 total 24 drwx------ 5 root root 4096 Jun 20 07:36 223c2864175491657d238e2664251df13b63adb8d050924fd1bfcdb278b866f7 drwx------ 3 root root 4096 Jun 20 07:36 3a36935c9df35472229c57f4a27105a136f5e4dbef0f87905b2e506e494e348b drwx------ 5 root root 4096 Jun 20 07:36 4e9fa83caff3e8f4cc83693fa407a4a9fac9573deaf481506c102d484dd1e6a1 drwx------ 5 root root 4096 Jun 20 07:36 e8876a226237217ec61c4baf238a32992291d059fdac95ed6303bdff3f59cff5 drwx------ 5 root root 4096 Jun 20 07:36 eca1e4e1694283e001f200a667bb3cb40853cf2d1b12c29feda7422fed78afed drwx------ 2 root root 4096 Jun 20 07:36 l
The “l” directory contains shortened layer identifiers as symbolic links. These shortened identifiers are used for avoid hitting the page size limitation on mount arguments.
$ ls -l /var/lib/docker/overlay2/l total 20 lrwxrwxrwx 1 root root 72 Jun 20 07:36 6Y5IM2XC7TSNIJZZFLJCS6I4I4 -> ../3a36935c9df35472229c57f4a27105a136f5e4dbef0f87905b2e506e494e348b/diff lrwxrwxrwx 1 root root 72 Jun 20 07:36 B3WWEFKBG3PLLV737KZFIASSW7 -> ../4e9fa83caff3e8f4cc83693fa407a4a9fac9573deaf481506c102d484dd1e6a1/diff lrwxrwxrwx 1 root root 72 Jun 20 07:36 JEYMODZYFCZFYSDABYXD5MF6YO -> ../eca1e4e1694283e001f200a667bb3cb40853cf2d1b12c29feda7422fed78afed/diff lrwxrwxrwx 1 root root 72 Jun 20 07:36 NFYKDW6APBCCUCTOUSYDH4DXAT -> ../223c2864175491657d238e2664251df13b63adb8d050924fd1bfcdb278b866f7/diff lrwxrwxrwx 1 root root 72 Jun 20 07:36 UL2MW33MSE3Q5VYIKBRN4ZAGQP -> ../e8876a226237217ec61c4baf238a32992291d059fdac95ed6303bdff3f59cff5/diff
The lowerest layer contains the “link” file which contains the name of the shortened identifier, and the “diff” directory which contains the contents.
$ ls /var/lib/docker/overlay2/3a36935c9df35472229c57f4a27105a136f5e4dbef0f87905b2e506e494e348b/ diff link $ cat /var/lib/docker/overlay2/3a36935c9df35472229c57f4a27105a136f5e4dbef0f87905b2e506e494e348b/link 6Y5IM2XC7TSNIJZZFLJCS6I4I4 $ ls /var/lib/docker/overlay2/3a36935c9df35472229c57f4a27105a136f5e4dbef0f87905b2e506e494e348b/diff bin boot dev etc home lib lib64 media mnt opt proc root run sbin srv sys tmp usr var
The second layer contains the “lower” file for denoting the layer composition, and the “diff” directory for the layer contents. It also contains the “merged” and the “work” directories.
$ ls /var/lib/docker/overlay2/223c2864175491657d238e2664251df13b63adb8d050924fd1bfcdb278b866f7 diff link lower merged work $ cat /var/lib/docker/overlay2/223c2864175491657d238e2664251df13b63adb8d050924fd1bfcdb278b866f7/lower l/6Y5IM2XC7TSNIJZZFLJCS6I4I4 $ ls /var/lib/docker/overlay2/223c2864175491657d238e2664251df13b63adb8d050924fd1bfcdb278b866f7/diff/ etc sbin usr var
A directory for running container have similar files and directories as well. Note that the lower list is separated by ‘:‘, and ordered from highest layer to lower.
$ ls -l /var/lib/docker/overlay/<directory-of-running-container> $ cat /var/lib/docker/overlay/<directory-of-running-container>/lower l/DJA75GUWHWG7EWICFYX54FIOVT:l/B3WWEFKBG3PLLV737KZFIASSW7:l/JEYMODZYFCZFYSDABYXD5MF6YO:l/UL2MW33MSE3Q5VYIKBRN4ZAGQP:l/NFYKDW6APBCCUCTOUSYDH4DXAT:l/6Y5IM2XC7TSNIJZZFLJCS6I4I4
The result of
mount is as follows:
$ mount | grep overlay overlay on /var/lib/docker/overlay2/9186877cdf386d0a3b016149cf30c208f326dca307529e646afce5b3f83f5304/merged type overlay (rw,relatime, lowerdir=l/DJA75GUWHWG7EWICFYX54FIOVT:l/B3WWEFKBG3PLLV737KZFIASSW7:l/JEYMODZYFCZFYSDABYXD5MF6YO:l/UL2MW33MSE3Q5VYIKBRN4ZAGQP:l/NFYKDW6APBCCUCTOUSYDH4DXAT:l/6Y5IM2XC7TSNIJZZFLJCS6I4I4, upperdir=9186877cdf386d0a3b016149cf30c208f326dca307529e646afce5b3f83f5304/diff, workdir=9186877cdf386d0a3b016149cf30c208f326dca307529e646afce5b3f83f5304/work)
Consider three scenarios where a container opens a file for read access with overlay.
The file does not exist in the container layer. If a container opens a file for read access and the file does not already exist in the container (“upperdir”) it is read from the image (“lowerdir”). This should incur very little performance overhead.
The file only exists in the container layer. If a container opens a file for read access and the file exists in the container (“upperdir”) and not in the image (“lowerdir”), it is read directly from the container.
The file exists in the container layer and the image layer. If a container opens a file for read access and the file exists in the image layer and the container layer, the file’s version in the container layer is read. This is because files in the container layer (“upperdir”) obscure files with the same name in the image layer (“lowerdir”).
Consider some scenarios where files in a container are modified.
Writing to a file for the first time. The first time a container writes
to an existing file, that file does not exist in the container (“upperdir”).
overlay2 driver performs a copy_up operation to copy the file
from the image (“lowerdir”) to the container (“upperdir”). The container then
writes the changes to the new copy of the file in the container layer.
However, OverlayFS works at the file level not the block level. This means that all OverlayFS copy-up operations copy entire files, even if the file is very large and only a small part of it is being modified. This can have a noticeable impact on container write performance. However, two things are worth noting:
The copy_up operation only occurs the first time any given file is written to. Subsequent writes to the same file will operate against the copy of the file already copied up to the container.
OverlayFS only works with two layers. This means that performance should be better than AUFS which can suffer noticeable latencies when searching for files in images with many layers.
Deleting files and directories. When files are deleted within a container a whiteout file is created in the containers “upperdir”. The version of the file in the image layer (“lowerdir”) is not deleted. However, the whiteout file in the container obscures it.
Deleting a directory in a container results in opaque directory being created in the “upperdir”. This has the same effect as a whiteout file and effectively masks the existence of the directory in the image’s “lowerdir”.
To configure Docker to use the
overlay storage driver your Docker host must be
running version 3.18 of the Linux kernel (preferably newer) with the overlay
kernel module loaded. For the
overlay2 driver, the version of your kernel must
be 4.0 or newer. OverlayFS can operate on top of most supported Linux filesystems.
However, ext4 is currently recommended for use in production environments.
The following procedure shows you how to configure your Docker host to use OverlayFS. The procedure assumes that the Docker daemon is in a stopped state.
Caution: If you have already run the Docker daemon on your Docker host and have images you want to keep,
pushthem Docker Hub or your private Docker Trusted Registry before attempting this procedure.
If it is running, stop the Docker
Verify your kernel version and that the overlay kernel module is loaded.
$ uname -r 3.19.0-21-generic $ lsmod | grep overlay overlay
Start the Docker daemon with the
overlay2 storage driver.
$ dockerd --storage-driver=overlay &  29403 root@ip-10-0-0-174:/home/ubuntu# INFO Listening for HTTP on unix (/var/run/docker.sock) INFO Option DefaultDriver: bridge INFO Option DefaultNetwork: bridge <output truncated>
Alternatively, you can force the Docker daemon to automatically start with
overlay2 driver by editing the Docker config file and adding
--storage-driver=overlay flag to the
DOCKER_OPTS line. Once this option
is set you can start the daemon using normal startup scripts without having
to manually pass in the
Verify that the daemon is using the
overlay2 storage driver
$ docker info Containers: 0 Images: 0 Storage Driver: overlay Backing Filesystem: extfs <output truncated>
Notice that the Backing filesystem in the output above is showing as
extfs. Multiple backing filesystems are supported but
extfs (ext4) is
recommended for production use cases.
Your Docker host is now using the
overlay2 storage driver. If you
mount command, you’ll find Docker has automatically created the
overlay mount with the required “lowerdir”, “upperdir”, “merged” and “workdir”
As a general rule, the
overlay2 drivers should be fast. Almost
certainly faster than
devicemapper. In certain circumstances it may
also be faster than
btrfs. That said, there are a few things to be aware of
relative to the performance of Docker using the
Page Caching. OverlayFS supports page cache sharing. This means multiple
containers accessing the same file can share a single page cache entry (or
entries). This makes the
overlay2 drivers efficient with memory and
a good option for PaaS and other high density use cases.
copy_up. As with AUFS, OverlayFS has to perform copy-up operations any time a container writes to a file for the first time. This can insert latency into the write operation — especially if the file being copied up is large. However, once the file has been copied up, all subsequent writes to that file occur without the need for further copy-up operations.
The OverlayFS copy_up operation should be faster than the same operation with AUFS. This is because AUFS supports more layers than OverlayFS and it is possible to incur far larger latencies if searching through many AUFS layers.
RPMs and Yum. OverlayFS only implements a subset of the POSIX standards.
This can result in certain OverlayFS operations breaking POSIX standards. One
such operation is the copy-up operation. Therefore, using
yum inside of a
container on a Docker host using the
overlay2 storage drivers is
unlikely to work without implementing workarounds.
Inode limits. Use of the
overlay storage driver can cause excessive
inode consumption. This is especially so as the number of images and containers
on the Docker host grows. A Docker host with a large number of images and lots
of started and stopped containers can quickly run out of inodes. The
does not have such an issue.
Unfortunately you can only specify the number of inodes in a filesystem at the
time of creation. For this reason, you may wish to consider putting
/var/lib/docker on a separate device with its own filesystem, or manually
specifying the number of inodes when creating the filesystem.
The following generic performance best practices also apply to OverlayFS.
Solid State Devices (SSD). For best performance it is always a good idea to use fast storage media such as solid state devices (SSD).
Use Data Volumes. Data volumes provide the best and most predictable performance. This is because they bypass the storage driver and do not incur any of the potential overheads introduced by thin provisioning and copy-on-write. For this reason, you should place heavy write workloads on data volumes.